Processor | Onboard Intel 8 th Whiskey Lake-U /Coffee Lake-U serial processor |
EFI BIOS | |
Ram | 2*DDR4 2666 MHz SO-DIMM dual channel, Max support 64GB |
Display | 24-bit dual-channel LVDS, 1920x1200; EDP, 4096x2304@60Hz (either LVDS or EDP) |
1*VGA , 2048x1536 ;1* HDM I2.0,4096x2304@60Hz | |
Storage | 2* SATA 3,(Choose one of SATA1 and mSATA, choose one of SATA2 and onboard SSD) |
1* m SATA port ,Support SANDISK Protocol (choose one from SATA1) | |
Onboard SSD 32GB/64GB/128GB(Onboard SSD and SATA2 choose one) | |
I/O Interface | 1*DC JACK, 1*VGA , 1*HDMI , 2*LAN , 2*USB 3.1, 1*LINE OUT , 1*MIC |
Other | TPM2.0 |
2 Intel I225 2.5G network cards (when the I/O interface is 4 USB, there is only 1 network card) | |
1*PCIE_X4,port NVMe | |
1*KEY-E,CNVI/PCIE/USB Protocol ,WIFI module | |
1*miniPCIe socket , support PCIe and USB device (Only one set of USB8/9 pins is available when there is a USB signal) | |
4*RS232 , 2*RS422/485(Optional 6 RS232, or 5 RS232 and 1 RS422/RS485 ) | |
4 USB3.1, when using Celeron Pentium processor, only 2 USB3.1, 6 USB2.0 | |
Aluminum fan radiator (supports automatic and manual fan speed adjustment) | |
1 PS/2 pin connector | |
8-bit GPIO, provide routines; support touch screen | |
0-255 seconds watchdog, provide watchdog routine | |
Power supply | DC12V power supply (the current of the selected power supply needs to reach 7A or more) |
Working Environment | Working temperature: -20ºC ~ +60ºC; Working humidity: 0% ~ 90% relative humidity, no condensation |
Storage temperature: -40ºC ~ +85ºC; Storage humidity: 0% ~ 90% relative humidity, non-condensing | |
System | Windows10 , Linux |
Size | 170x170mm |
Weight | 228g(Without heat sink) |